Gypsum tiles have to be laid correctly, as not just the aesthetic look of decorative facing, but also the service life of the

material will be dependent on the technologies of job. The product is universal, and it can be connected to concrete, plaster,

brick or gypsum board sheets, and provided the surface of the base is and has no flaws.

If the flaws of the base are significant, it ought to be completely treated with primer, then a cement mortar is created, which

fills all the cracks. Subsequently the surface ought to be repeatedly primed and dried. Primer therapy is necessary to improve the

bond between the tile and the walls. In this case, its makeup should pick a particular, containing elements which stop the

appearance of fungus and mould.

In today’s interior of the rooms most frequently used gypsum tiles, imitating natural stone or brick. To carry out decorative

finishing yourself, it’s necessary first of all to pick a scheme of tile positioning and prepare a solution. It’s important to

look closely at the reverse side of the substance. If its surface has an embossed surface, then the adhesive ought to be put using

an even trowel, also if it’s even, then with a notched one.

The technology of the work is as follows:

* A thin layer of adhesive mortar is put on the pre-prepared wall. It is spread over the foundation so that it is likely to

place 4-5 tiles. Decorative cladding can be put both on plasterboard, also on putty.

* Glue the rear side of the tiles with glue.

* Plaster elements are pressed against the wall and their place is adjusted. To align the seams, it’s recommended to use


* Finishing is performed in rows, all which should be shifted by half of a tile. Facing is carried out to the corners of the

room, then immediately remove any residual mortar at the joints.

Drying the walls requires no longer than a day and takes a continuous humidity and temperature in the room. The final point in the

placing of gypsum tiles is that their decor. To get this done, the joints between these components are filled with a particular

solution, the shade of which suits the brick.

Cosmetic fake of brickwork around the walls will be completed in the following manners:

* Cutting the darkened surface of the seams of masonry using a bolt cutter with your own hands;

* placing of tiles beneath the brick:

* imitating the structure and colour of the side surface of one brick;

* Imitating a fragment of brickwork of many bricks.

The perfect way to decorate”under the brick” will be the one that enables you to make a usable coating together with the utmost

look of its resemblance to natural masonry. All three approaches to carry out this kind of finishing works fulfill the

requirements, but the cutting of joints with a bolt is more labor-intensive along with the creation of large quantities of dust,

so let us consider more ordinary manners.

The old finish is removed from the walls, and the surface, if needed, is leveled to get rid of the need to paste plaster on a

thick coating of adhesive.

Combining these cladding with different kinds of interior finishes may be both orderly and done with no clear consistency,

chaotically, with imitation of signs of aging.

With the support of decorative gypsum tiles it’s possible to imitate a large number of textures.

A lot of textures can be imitated with the support of cosmetic gypsum tiles.

The wall on which it’s to be installed must possess the following characteristics:

* Hardness and durability of the outside;

* The absence of uneven locations and sharp differences;

* no more deformations.

Cosmetic tiles at the interior of the kitchen

Walls are created from a variety of substances, so let us break down the principles of installation.

When working with concrete, there will not be any big problems. It’s simply essential to take into account the porosity of the

material. Concrete, which has nearly no pronounced pores, ought to be treated with a great primer.

Mounting gypsum tiles concrete

Before starting work on the installation of gypsum tiles on the walls, then it’s worth checking the strength of this surface.

After the plaster doesn’t drop off the walls and in exactly the same time holds nicely, you can simply paint it using primer.

Mount the tiles on the painted concrete shouldn’t. The surface ought to be scratched, making sure to misfire, and it needs to be

grouted and coated with a layer of plaster.

  • 作品名称 / Name
  • 尺寸 / Size
  • 材质 / Material
  • 创作日期 / Date
Single Ukraine Girls: What's so perfect about These
故居 / Former
Odessa Brides: Authentic Pearls From Near The Sea! <p></p>
圣诞树/Christmas Tree
Twilight Princess Rom- Get Ultimate Expertise With New Collection _42
The Best Way to update an old Inside Doorway Using their hands
Flooring for the kitchen: what's the best choice?
黑天鹅 / Black
Download Retro Games_146
Spin palace flash casino online
How To Perform Wii Games In High Definition, For Your PC